User's Manual

4. Make sure that the RCV-3000 is connected to a PC or notebook, and select [reconnect] or

[manual settings]

5. The logger can be set to record by a set time or set distance. The conditions for recording can

be set the following ways:

(1) Select car, bicycle, exercising, or walking mode.

(2) Manually set the time or distance.

6. When the logger’s data storage is full, there are two modes to choose from:

(1) Rewrite: When the data is full, data will begin to be rewritten, overwriting the data from the

beginning.

(2) Terminate: When the data is full, the logger will cease to record any further data.

7. Press [Confirm] to start logging according to the new setting.

Data Read

When the logger RCV-3000 is connected to a PC or notebook through USB or Bluetooth, the data

can be extracted through ezTour. Please see ezTour instruction manual for details.