User's Manual

- 43 -
 On the main menu page, click Setup.
 Select “Warning”.
 Select “Altitude”.
 Enter the appropriate value. The unit is meter.
 When completed, press the confirmation button. System will return to
the previous step automatically.
Time Warning
Step:
 On the main menu page, click Setup.
 Select “Warning”.
 Select “Time”.
 Enter appropriate value. The unit is minute.
 When completed, press the confirmation button. System will return to
the previous step automatically.
Note:
 Once Warning is turned ON, system will prompt warning message and
start warning beep sound when determined warning distance, altitude
or time is achieved. You can select “Warning off” or “Repeat Warning”.。
 If you select “Warning off”, both warning message and warning beep
sound will be turned off.
 If you select “Repeat Warning”, both warning message and warning
beep sound will repeat every time when one of the warning values is
reached.
Figure 52 Warning is on
Factory reset
Press Factory Reset is to restore the setting of “Profile”, “System”, and “Warning” to