User's Manual

- 13 -
Figure 7 Compass information
Step:
 Press the left button once to enter the Trip Computer.
 Press the button three times to enter the compass page.
 You can also check the compass pointer and G-Finder information.
 To calibrate the compass, press 。
 Follow the on-screen instruction to calibrate the compass. When finished, the
system will restore to the compass screen.
Note: During the calibration, you are not allowed to exit; nor is the Left/Right button
functional.
General information
General information contains GPS coordinates information, GPS signal strength,
power, battery status and current time.