User's Manual

10
Wireless Link- GPSport 260
The GPSport 260 Pro is using ANT+ to collect and transfer sensor data. The three sport sensors
supported are HRM, speed sensor and cadence.
Activate Wireless Link
Users have to activate the GPSport 260 Pro wireless link before they connect the GPSport 260 Pro with
sport sensors. If the wireless link is not yet activated, the setting menu displays “Activate” for selection,
otherwise, “Deactivate” is displayed when the device is active.
Scan Sensor
Select ANT+ Devices to select the sport sensor to connect.
The device will start scanning devices nearby. When completed, scanned devices are listed.
Connect and Detect
Move the Up/Down arrow to select the sensor to connect.
A warning message prompts to remind users to make sure the selected sensor is properly installed, for
example, HRM should be well-strapped to your chest so that the GPSport 260 Pro can detect without