User Guide HOLSEM-A6 LED DISPLAY
Note: Please read carefully the instruction manual before using the appliance. Keep the manual for reference in future. Your easy and healthy cooking experience starts from here.
Product Structure Diagram: 1. Fry basket 2. Protective cover 3. Push-release button 4. Handle bar 5. Fry pot 6. Top cap 7. Control panel 8. Air inlet 9. Temperature increase button 10. Temperature decrease button 11. Mode selection button 12. ON/OFF button 13. Keep warm 2 hours bottom 14. Time increase button 15. Time decrease button 16. Air outlet 17. Power cable Cautions： Please carefully read the instruction manual, before using the appliance.
Security Warnings: - Do not use the AC power other than 120V to avoid electric shock, fire and other accident. - Please only plug to an wall outlet above 15A. To ensure continued protection again risk of electric shock, connect to properly grounded power socket only. - Please keep the plug clean and avoid accident. - Do not damage, strongly pull or twist the power cord. Do not use it carry heavy loads, or transform it, let the cord hang over edge of table of counter.
Before the first use: 1. Remove all packaging material. 2. Remove the stickers or labels from the appliance 3. Thoroughly clean the basket and the pan with hot water, some washing-up liquid and a non-abrasive sponge. 4. Wipe the inside and outside of the appliance with a moist cloth. Preparing for use Place the appliance on a stable and flat surface. Note: Do not place the appliance on non-heat-resistant surface.
8. When you hear the timer beep, the set preparation time has elapsed. Pull the pot out of appliance and place it on a heat-resistant surface. 9. Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the pan back into the appliance and set the timer to a few extra minutes. 10. If the ingredients ready, carefully pull out the pan, and press the basket release button and lift the basket out of pan to remove the ingredients.
Care and Maintenance Note: Clean the appliance after every use. 1. Before cleaning, turn the timer to 0, unplug the appliance and waiting for the appliance to cool down. Don’t touch the surface before it cools down. 2. Do not immerse the device in water or any other liquid. The device is not dishwasher proof. 3. Clean the surface of the fryer pot and basket with hot water, some dish washing liquid and a non-abrasive sponge.
Troubleshooting: Problem Possible Cause Solution Power cord has not been inserted into the power socket Closely insert the power cord into the grounded power socket. Did not set the cook mode Set the timer to desired cooking time, then the appliance able to connect with power.
HOLSEM Your Safe is Our Priority Add: 1045 E. Valley Blvd. A112, San Gabriel, CA 91776, United States Email: customerservice@holsem.
