Installation Guide

3
10285 Wayne Ave. • Cincinnati, OH 45215-6399
(p) 800.772.8800 • (f) 800.772.8806
www.hollaender.com
Assembly/Installation
Instructions
Speed-Rail
®
Step 6
Place the appropriate number of fittings on the top rail but do not tighten. Starting with the first post, attach the first top rail
fitting and slide other fittings to the correct position.
Step 7
Once the top rail is installed, plumb rail and tighten all set screws starting with flange and working up. Set screws should be
tightened to approximately 16 ft. lbs. If torque wrench is not available, tighten set screw until it contacts pipe then tighten one
more full revolution.