Installation Guide

1
10285 Wayne Ave. • Cincinnati, OH 45215-6399
(p) 800.772.8800 • (f) 800.772.8806
www.hollaender.com
Assembly/Installation
Instructions
Speed-Rail
®
Tools Needed:
Tape Measure
Chalk Line
Portable Chop Saw
3/16˝ Hex Driver and
Socket Wrench
Hammer Drill with 3/8˝ Bit
Constructed of aluminum/
magnesium alloy, Speed-Rail
Systems are manufactured
with maximum flexibility and
strength in mind to provide
you with years of structural
integrity for a wide variety of
demanding applications. In
addition the flexibility,
strength and cost efficiency,
Speed-Rail fittings are non-
magnetic and non-sparking
and are virtually mainte-
nance free. Speed-Rail is the
fastest to install, easiest to
repair and reconfigure.
Top Mount
Side Mount
Flanges should be aligned along the
chalk line and spaced the distance
shown on project drawings. Drill holes
in concrete using flange as a template
and install anchors per manufacturers’
recommendation.
Top Mount
Side Mount
Step 1
Step 2
Snap a chalkline the required distance
from the face of the wall.
Top Mount
Line should be located one half the
width of the base flange form the
center line of the handrail.
Side Mount
Line should be located at the required
height of the top of the flange.