Installation Guide

2
10285 Wayne Ave. • Cincinnati, OH 45215-6399
(p) 800.772.8800 • (f) 800.772.8806
www.hollaender.com
Assembly/Installation
Instructions
Speed-Rail
®
Step 4
Slip mid rail fittings onto all posts; position properly and
tighten set screws.
Step 5
Starting at end or corner, place post into flange and insert
appropriate mid rail. Install each subsequent post and mid
rail throughout the length of handrail.
End Post Line Post
Step 3
Determine post and mid-rail cut length as shown below and
cut quantity required.
1
1
/4˝ IPS
Top mount post cut length: H - 1
7
/8˝ (48mm)
Side mount post cut length: H - 1
7
/8˝ (48mm) + D + 5˝ (127mm)
Mid rail length: L - 1
7
/8˝ (48mm)
1
1
/2˝ IPS
Top mount post cut length: H - 2˝ (51mm)
Side mount post cut length: H - 2˝ (51mm) + D + 5˝ (127mm)
Mid rail length: L - 2˝ (51mm)
2˝ IPS
Top mount post cut length: H - 2
1
/2˝ (64mm)
Side mount post cut length: H - 2
1
/2˝ (64mm) + D + 5˝ (127mm)
Mid rail length: L - 2
1
/2˝ (64mm)
Top Mount
Side Mount