Installation Guide

Turn Wrench,
counter-clock-wise.
REMOVE CAP WITH HF WRENCH,
OR BREAK-OUT WITH HAMMER.
(SLEEVE SHOWN POURED IN CONCRETE)
(Fig. 1)
INSTALL 2" TALL WATER DAM.
(ADD THREAD SEALANT IF DESIRED)
(Fig. 2)
Turn Water Dam, clockwise.
Pipe
INSTALL PIPE FROM BELOW.
(SOAPY WATER EASES PIPE INSERTION)
(Fig. 3)
Hydroflame PRO Series - Water Dam Installation. See Hydroflame Pro - "Best Practices" document and UL's online certification directory (file R25101) for more details. Rev A