Submittal Sheet

ALL DIMENSIONS IN INCHES
13" to 25"
.63
surface mounting. Use anywhere high strength is required.
others. Attaches between studs, joists, etc. Bendable end tabs allow recessed or
spec_SB_Series_RevN
2560 PROGRESS STREET / VISTA, CA 92081 / 800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
vertically or horizontally. Use with high-ear or wing-ear fittings. Supports shower
head, tub spout, piping, etc. Holds HOLDRITE Pro Clamp™, Stout Clamp™ and
Adjustable length support system
HOLDRITE® Stout Bracket® #SB1, #SB1S, #SB2 & #SB2S
PRODUCT SPECIFICATION DRAWING
Slot pattern permitts wide versatility in positioning. Mount fittings, clamps, etc.
Product Information:
Material: 16 gage CRS, galvanized per ASTM-A653, G90•
SB1S, SB2S series includes (4) #8 X 5/8" long self-drilling•
sheet metal screw with 1/4" X #2 phillips hex head
UPC / IPC / IAPMO listed•
UL listing•
.63
.63
10" to 18"
.63
#SB2 / #SB2S
#SB1 / #SB1S
Product Submittal
Job Name:
Date:
Part Number: Qty:
Architect / Owner:
Contractor:
Notes:
Center Pt. Uniform Load
400 1150
164 300
104 131
Beam Span Maximum Load (lbs.)
10
Inches
14.5
18
Center Pt. Uniform Load
158 225
124 165
68 120
22.5
24
Beam Span Maximum Load (lbs.)
18
Inches