Use and Care Guide

PEXRITE
®
– The Torchless Installation
™
holdrite.com • [phone]
PEXRITE
®
Supports Integrate Directly with PEXRITE
®
Brackets Only
Eliminates in-wall fittings and concealed joints
Installs directly to the stud
Provides 360° turning radius in
PEXRITE brackets
Reduces noise and vibration
PEX TUBING
PEXRITE
®
Turn-Out
#704
COPPER OR RIGID TUBING
PEXRITE
®
Lock-n-Load
™
#701
Designed for PEX, copper and CPVC
Tightens by hand - no tools or
hardware required
Eliminates soldering
Secure fit prevents forward
and backward movement
Pick Your Stub-Out Method
PEXRITE
®
Turn-out #704 Installation Instructions
2
Insert #704 into bracket
from the front.
1
Install PEXRITE bracket to
studs.
4
Insert PEX tube at 45° an-
gle and set stub-out length.
Bend tube forward and
snap into #704.
5
Complete! No concealed
joint in the wall.
6
3
Position #704 until bracket
fits into groove, then rotate
into place.
PEXRITE
®
Lock-n-Load #701 Installation Instructions
1
Install PEXRITE bracket to
studs.
4
Load tubing through #701
from back.
IMPORTANT:
Confirm compatibility
of copper ells with PEX
tubing manufacturer.
#103-18