How to Guide

45 Bracket, 4 places
"C" Bracket, 2 places
Fully Assembled
WATER HEATER
WALL STRUCTURE
24"
(Inside Wall)
4" (Inside Wall)
2X 45°
Pan Assy
ALL DIMENSIONS IN INCHES
800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_30-SWHP-WM_RevC
PRODUCT SPECIFICATION DRAWING
QUICK STAND™ #30-SWHP-WM
Wall Mounted Equipment Platform
Product Information:
Material: •
Pan: 18 gage CRS, galvanized
C-Brackets (2): 16 gage CRS, galvanized
45 Brackets (4): 12 gage, CRS, galvanized
Threaded Rod (2): Low carbon steel, zinc plated, #3/8"-16 x 30.85" long
Wide platform allows water heaters up to 23 ½" diameter •
Watertight corners and welded 1 ¼" steel drain body eliminate need for additional drain pan •
Static load rating 300 pounds with 2X safety factor (depending on structural anchorage) •
Professional Engineer stamped documentation available •
Galvanized steel construction •
Suspends with user-supplied 3/8" hardware/anchors to mount to wall, 4 places •
Installation instructions for mounting to concrete or framed wall structure available •
Patent Pending •
THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT
TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.
The #30-SWHP-WM Wall Mounted Equipment Platform is engineered to support water
heaters up to 20 U.S. gallons, or other equipment, up to 300 pounds total weight.
This time and labor savings tool is designed for the Professional Contractor. Design
features requested by plumbers are incorporated into a professional platform and
drain pan combination. See Installation Instructions for detail.