Submittal Sheet

9.50
1.50
6X EXTRUDED HALF-HOLES FOR 1/2" COPPER,
ON 1" CENTERS.
4X EXTRUDED HALF-HOLES FOR 3/4" COPPER,
ON 2" CENTERS.
.81
.75
.20
4" Stainless Steel Band
ALL DIMENSIONS IN INCHES
2560 PROGRESS STREET / VISTA, CA 92081 / 800-321-0316 OR 760-744-6944 / FAX: [phone] / WWW.HOLDRITE.COM
spec_111-S_RevD
PRODUCT SPECIFICATION DRAWING
HOLDRITE® #111-S
Supports copper water lines vertically or
horizontally off of adjacent piping
The HOLDRITE #111-S is Copper-Bonded™ steel and supports both 1/2" and 3/4"
pipes. Designed to fit within a 3-1/2" wall. The #111-S positions water supplies for
lavatories and other fixtures. Mount the #111-S to the vertical vent or waste pipe
with the self-locking 4" stainless steel band using the isolating felt and solder your
pipes to the bracket. The 1/2" notches provide 4", 6" or 8" centers, while the 3/4"
notches provide 4" or 8" centers. When soldering, heat the pipe, not the bracket.
Product Information:
Material: 16 gage CRS, Copper-Bonded™ •
Load rating: 25 pounds •
UPC / IPC / IAPMO listed •