User Guide

CHLOR RID International, Inc.
P.O. Box 908 Chandler, AZ 85244
Toll Free 800-422-3217 Office 480-821-0039 Fax [phone]
www.chlor-rid.com
HOLD*BLAST
TM
Surface Passivator
Data Sheet
BENEFIT: As a surface passivator, HOLD*BLAST chemically changes the active surface of metal to a
much less reactive state. Surface corrosion can occur when water wet surfaces react with atmospheric
oxygen. This often results in the formation of flash rust, which can be eliminated with the use of
HOLD*BLAST. This product passivates the surface to stop the formation of surface rust for long periods of
time, often several days.
DESCRIPTION: HOLD*BLAST is a concentrated organic chemistry which is added to water. This
biodegradable product does not leave a film or residue to interfere with coating adhesion.
USES: HOLD*BLAST is a cost effective, environmentally safe, coating friendly additive to prevent flash
rusting. Use in a solution with water:
after: or during:
* dry abrasive blasting * water washing
* power tool cleaning * wet abrasive blasting
* UHP waterjetting * slurry blasting
* vapor/mist blasting
* UHP waterjetting
SURFACE PREPARATION: Many specifications require no flash rust. This product will help meet that
specification.
APPLICATION: Application methods vary. (See Directions).
EQUIPMENT CLEANUP: Flush with clean fresh water.
It is not necessary to use entire contents. Partially filled containers should be closed tightly.
Color: Colorless Single component
Shelf life: 36 months pH 10.8 (+/- 0.2)
Application temperature: 35 to 211F Packaging: 5/55 gallon
Solubility: Complete Phosphates: NONE
Non-flammable Biodegradable
Storage: Out of direct sunlight, avoid freezing Non-hazardous
Odor: Slight pleasant odor No VOC’s
WARRANTEE: CHLOR RID International Inc. warrants this product to be identical in chemical and
physical properties from batch to batch within the specification limits of the raw materials used in their
manufacture.
SAFETY PRECAUTIONS: KEEP OUT OF REACH OF CHILDREN. Do not mix with other chemicals. See
Material Safety Data Sheet for full precautions prior to use. Professional use only.
Made in U.S.A.
092614