Installation Guide

c.a.
14
Install Wall Jambs
Fig 3
NOTE: Refer to the "Proper Backing" bullet on Page 2.
Mark down the predrilled holes on the Wall Profiles.
Please see Fig 3 for details
3. Place the Left Wall Profile (4L) and the Right Wall Profile
(4R) against the two walls, make sure that the Wall Profiles
are vertical to the floor.
Please see Fig 4 for details
4. Drill the holes in the wall using a 3/8” drill bit and apply silicone sealant
into the holes, insert the 5/16” Wall Anchors (14).
4
b.