Installation Guide

Typical
Bottom Guide
Threshold
VHB
tape
Silicone
bead
Outside
of
shower
Inside
of
shower
3/8”
3”
Flat width
of threshold
Alternate
Detail D
Detail D
Guideline Placement
if the “flat” is less than approximately 3”, the center
guide may hang over the back. This is common for
many molded shower pans. If needed you can use a
high quality VHB tape and silicone to reinforce the
center guide as shown to the right.
Alternate Detail D:
The center guide will extend approximately 3”
behind the Threshold Guideline (A to B). This can
deviate somewhat due to adjustments made during
installation.
Bottom Guide (Detail D)
The “flat width” of the threshold does not include
rounded edges. Measure 3/8” from the front of the
threshold to the back, this will be the Threshold
Guideline for the front of the splash guard. Draw
this line from A to B and record the distance.
Threshold Guideline (A to B)
Overhanging
Bottom Guide
Threshold
VHB
tape
Silicone
bead
Outside
of
shower
Inside
of
shower
D
A
B