Installation Guide

Installation Instructions
1/4" Frameless Slider
Models: STE / SSE or DTE / DSE
Parts List
Extra screws may be provided for your convenience
10
11
5
5
3
12
7
8
1
12
3
7
8
10
11
7
4
2
12
6
7
10
11
Item
1
2
3
4
5
6
7
8
9
10
11
12
Description
Tub Header
Stay Clean Sill
Tub Jamb
TF-2B T-Fin
Sliding Glass Panel
AVG-3 Center Guide
Bumper Guides
Hanger Bracket Assy
#8 x 1-1/2 FHPHSMS
Wall Anchor
#6 x 3/8 PHPHSMS
QTY
1
1
2
1
2
1
4
4
6
6
3
Part #
1049
1062
1051
4032
7102
2206
2209
2256
2101
2217
2102
Item
Description
QTY
Part #
13
Towel Bar/Screw Kit
1
BP.27XX
Item
Description
QTY
Part #
13
STEP 1 - CENTERLINE:
Ÿ Locate the centerline of the shower or tub rim and mark it with a water soluble marker. See illustration #3 (page 3)
Ÿ The Stay Clean Sill (Item #2) is installed directly over and parallel to the centerline
Ÿ Measure the wall to wall distance, 1/2” above the threshold to allow for any radius or obstructions in the corners
Ÿ Deduct 7/16” f cut the Stay Clean Sill (2) to lengthrom this measurement and
Installation
CENTER GUIDE (6)
#6X3/8” PHPHSMS (12)
STAY CLEAN SILL (2)
T-FIN (4)
STEP 2 - STAY CLEAN SILL:
ILLUSTRATION #2
Ÿ Mark the center of the Stay Clean Sill for the Center Guide
Ÿ Use the Center Guide’s hole for a template and mark the
location onto the sill.
Ÿ Drill hole with a 1/8” drill bit.
Ÿ Do not attach the Center Guide at this time.
Ÿ Install the T-Fin into the Stay Clean Sill with the fin pointing
down. Flush cut at the ends.
Ÿ Set the Sill in place over the centerline and hold in place with
Painters tape.
(2) (6).
(6)
See illustration #2.
(6)
(2)
(2)
Page 2
ILLUSTRATION #1
14 BP.3000 Anti jump Bag 1
Showerhead
Wall
ACTUAL SIZE
12