Other

C
e
n
t
e
r
l
I
n
e
C
e
n
t
e
r
l
I
n
e
Centerline (dotted)
#7b Wall Leans
“
#7a Wall Leans
“
#3 Bottom
“
“
or
#4a Treshold
Level
Drops
Left Right
#1 Mark the
Centerline
of Unit
#8 Showerhead
Location
#7b Wall Leans
“
#7a Wall Leans
“
#3 Left Base
“
“
or
#4a Treshold
is Level
Drops
Left Right
#1 Mark the
Centerline
of Unit
#8 Showerhead
Location
Watch the video and record your measurements by the numbers. Include unit information
as well, concerning model number, metal finish, glass type, etc.
REV. 3/14/17
Document:
MM.3344
Follow these simple steps:
7 (a-b) Left Wall: Determine if there is a gap between the wall and level at the top or bottom of the enclosure
7 (c-d) Right Wall: Determine if there is a gap between the wall and level at the top or bottom of the enclosure
8. Is the showerhead on the left wall of unit or on right wall, or both. If rain shower, put note in Comments
“
or
#4b Treshold
Level
Drops
“
#4a Threshold
Drops
(or leave blank)
#7b Wall Leans
“
#7c Wall Leans
“
(or leave blank)
#7b Wall Leans
“
#7a Wall Leans
“
(or leave blank)
#7b Wall Leans
“
#7b Wall Gap
“
(or leave blank)
Scan QR to download this measuring form
How to Measure a 90° Stall
#2 Max Height
“
#2 Max Height
“
#3 Bottom
“
#4 Right Base
“
“
#4c Threshold
(or leave blank)
Drops
1 Mark Centerline of Unit on masking tape on with water based
marker
2 Determine and Mark the Max Height at the top of the unit
3 Measure the wall to joint distance for the Left Base of unit
4 Measure the joint to wall distance at Right Base of unit
6(a-c) Determine if Threshold is Level or if it Drops from
side to side. Place level at the joint to determine
“
or
#4a Treshold
Level
Drops
“
or
#4a Treshold
is Level
Drops
“
or
#4b Treshold
Level
Drops
“
#4b Threshold
Drops
(or leave blank)
Model Number:
Metal Finish:
Glass Type:
Handle or
Towel Bar Type:
Comments:
#7b Wall Leans
“
#7d Wall Gap
“
(or leave blank)
DRAFT