Data Sheet

Title
Drawing.
No.
UXM-30LXH-EWA Specification
C-42-04104
7/10
6.5 Example of wiring between sensors for motor rotation synchronization.
Synchronization master output of the master’s sensor is connected to the synchronization
input of the master itself and to the synchronization input of all slave sensors.
Motor rotation of each slave is shifted by a phase defined during the sensor setting. Configuration
and change of the phases are performed by means of the dedicated application program.
6.6 Timing chart of synchronization input/output
・ When synchronization master output of the master is not connected to the synchronization input of the
slave.
Synchronization output of each sensor has a cycle of 50 ms with the signal at low level for 1ms.
50ms
1ms
12.5ms
UXM-30LＸH-EWA
1st
UXM-30LＸH-EWA
2nd
Synchronization
master output
Synchronization
input
Synchronization
output
Synchronization
master output
Synchronization
input
Synchronization
output
Master
Slave
Synchronization
master output
Synchronization
input (1st)
(No input)
Synchronization
output (1st)
Synchronization
input (2nd)
(No input)
Synchronization
output (2nd)
OFF: High level
ON: Low level
OFF: High level