Product Specifications

Title
Drawing
No
UTM-30LX/LN Specification
C-42-3615
3/6
4. Specifications
Product Name Scanning Laser Range Finder
Model
UTM-30LX UTM-30LN
Light Source
Laser Semiconductor λ = 870nm , 905nm  Laser Class 1
Supply Voltage 12VDC ± 10%
Supply Current Max: 1A, Normal : 0.7A
Power Consumption Less than 8W
Detection Range
and
Detection Object
Guaranteed Range: 0.1 ~ 30m (White Kent Sheet)
Maximum Range : 0.1 ~ 60m
Minimum detectable width at 10m : 130mm (Vary with distance)
Accuracy
Under 3000lx : White Kent Sheet: ±30mm*¹ (0.1m to 10m)
Under 100000lx : White Kent Sheet: ±50mm*¹ (0.1m to 10m)
Measurement Resolution
and
Repeated Accuracy
1mm
0.1 – 10m : σ <10mm, 10 – 30m : σ <30mm (White Kent Sheet)
Under 3000lx : σ < 10mm*¹ (White Kent Sheet up to 10m) 
Under 100000lx : σ < 30mm*¹ (White Kent Sheet up to 10m) 
Scan Angle 270º
Angular Resolution
0.25º (360°/1440）
Scan Speed
25ms（Motor speed : 2400rpm）
Interface USB Ver2.0 Full Speed (12Mbps)
Output Synchronous Output 1- Point
Detection Output 1- Point 
LED Display

Green : Power supply
Red : Normal Operation (Continuous),
Malfunction (Blink)
Power supply
Object detection inside area (Continuous)
Malfunction (Blink)
Ambient Condition
(Temperature, Humidity)
-10ºC ~ ＋50ºC
Less than 85%RH (Without Dew, Frost)
Storage Temperature -25~75ºC
Environmental Effect Measured distance will be shorter than the actual distance under rain, snow and direct
sunlight*².
Vibration Resistance 10 ~ 55Hz Double amplitude 1.5mm in each X, Y, Z axis for 2hrs.
55 ~ 200Hz 98m/s
2
sweep of 2min in each X, Y, Z axis for 1hrs.
Impact Resistance 196m/s
2
In each X, Y, Z axis 10 times.
Protective Structure Optics: IP64
Insulation Resistance 10MΩ DC500V Megger
Weight 210g (Without cable)
Case Polycarbonate
External Dimension
(W×D×H)
60mm×60mm×87mm 
MC-40-3127
*¹ Under Standard Test Condition (Accuracy can not be guaranteed under direct sunlight.)
*² For sensor functions, please verify the in an indoor environment of 1000 lx or less. In avoiding unnecessary disturbance
cause by the raindrops, perform necessary signal processing for LX type and switch OFF the delay function for LN type.
5. Quality Reference Value
Vibration resistance during
operation
10~150Hz 19.6m/s
2
Sweep of 2min in each X,Y,Z axis for 30min
Impact resistance during
operation
49m/s
2
X, Y,Z axis 10 times
Angular Speed 2π/s (1Hz)
Angular Acceleration π/2rad/ s
2
Life-span 5 Years (Varies with operating conditions)
Noise Level Less than 25dB at 300 mm
Certification FDA Approval (21 CFR part 1040.10 and 1040.11)