Product Specifications

Title
Drawing
No
UTM-30LX/LN Specification
C-42-3615
2/6
1. Introduction
1.1 Operation principles
UTM-30LX/LN use laser source (λ = 870nm) to scan 270º semicircular field (Figure 1). It measures
distance to objects in the range and co-ordinates of those point calculated using the step angle. Sensor’s
measurement data along with the angle are transmitted via communication channel. Laser safety class 1.
Sensor is divided into two types depending upon the type of output.
1.2 Type
1.2.1 U TM-30LX
Synchronous output signal is available. The timing chart of this signal is shown in section 6
(Figure 3).  This synchronous signal can be obtain at each scan. These are mainly intended for
robotic applications.
1.2.2 UTM-30LN
It outputs warning signal whenever there is any object in the preset area. These are mainly
intended for area protection.
2. Structure (Laser range figure)
3. Important note
 This sensor is not a safety device/tool
 This sensor is not for use in military applications
 Read specifications carefully before use.
Detection Angle: 270º
Angular Resolution: 0.25º
Measurement Step: 1080
Max. Distance: 30m
Figure 1
Sensor
905nm
