Product Specifications

Title
Drawing
No
UTM-30LX-EW Specification
C-42-3785
7/7
10. Cautions
The heat is generated as the internal circuit of the sensor runs at a very high speed. The generated heat is
concentrated at the bottom of the sensor. Please mount a heat sink or any appropriate component to release the
heat. An aluminum plate (200mm x 200mm x 2mm) is recommended as the heat sink.
Mutual Interference could occur when two or more identical sensors are mounted at the same detection plane.
This is because the sensor could not identify the origin of the received laser pulses. It causes measurement error
for one or two steps. Performing data filtering could overcome this problem.