Brochure
Range Sensor
S
61
■ Connection
Input/output circuit
Wiring table
■ Available detection area
Straight
Note) This device shows the detection area on the basis of the center position of scanning.
Fan shaped
Ratio
Main circuit
-
Power for
sensor
+
-
Output1, 2, 3, 4
Input1, 2, 3, 4, 5
Output COM -
Input COM +
+VIN
-VIN
Power circuit
1kΩ
4.7kΩ
4.7kΩ
1kΩ
FG
I/O power
+
Load
■ Caution for installation
Detection area can be changed by photo-coupler input (anode common, each input ON current 4mA)
●
Detection area changeover
Set the area number with input1/2/3/4/5.
Laser radiation stops with all inputs ON.
■ External dimension
Note) Scanning range 180゚.
(Reception
part)
13
(Projection
part)
8
50
25
(Scanning center)
φ13
75
(Grommet)
0.5
27.7
210゚(View angle)
Note)
60
2-M4 depth 7
23
46
Output 3 lamp
(orange)
Output 2 lamp
(orange)
Output 1 lamp (orange)
Power lamp (green)
(flashes when malfunctio)
11
60
36.9 6.5
50
Center of reception
Center of projection
UBG-05LN
φ50mm
50mm Floor surface
5m
■ Caution for installation
(1) It may malfunction if there are any strong background
reflections. Tilt it downward/upward.
(2) When installation, don't close light-projection/reception window
or interrupt area.
(3) Don't make a wiring with high-voltage line or load line because
of avoiding noise or surge induction.
(4) Install it 50mm or more away from floor. If 50mm or less, install
it 1゜upward. Spread of sensor beam is φ50mm (Reference
value) at 5m.
tilt
Note) Connect OFF to 24VDC (H level input) and ON to 0V (L level input).
Input1 Input2 Input3 Input4 Input5 Area patterns
ON ON ON ON ON Laser OFF
OFF ON ON ON ON Area 1
ON OFF ON ON ON
Area 2
OFF OFF ON ON ON
Area 3
ON ON OFF ON ON
Area 4
OFF ON OFF ON ON
Area 5
ON OFF OFF ON ON
Area 6
OFF OFF OFF ON ON
Area 7
ON ON ON OFF ON
Area 8
OFF ON ON OFF ON
Area 9
ON OFF ON OFF ON
Area 10
OFF OFF ON OFF ON
Area 11
ON ON OFF OFF ON
Area 12
OFF ON OFF OFF ON
Area 13
ON OFF OFF OFF ON
Area 14
OFF OFF OFF OFF ON
Area 15
Input1 Input2 Input3 Input4 Input5 Area patterns
ON ON ON ON OFF
Area 16
OFF ON ON ON OFF
Area 17
ON OFF ON ON OFF
Area 18
OFF OFF ON ON OFF
Area 19
ON ON OFF ON OFF
Area 20
OFF ON OFF ON OFF
Area 21
ON OFF OFF ON OFF
Area 22
OFF OFF OFF ON OFF
Area 23
ON ON ON OFF OFF
Area 24
OFF ON ON OFF OFF
Area 25
ON OFF ON OFF OFF
Area 26
OFF OFF ON OFF OFF
Area 27
ON ON OFF OFF OFF
Area 28
OFF ON OFF OFF OFF
Area 29
ON OFF OFF OFF OFF
Area 30
OFF OFF OFF OFF OFF
Area 31