Assembly Instructions
I. With the help of another person, carefully place the table top (#1) facing down on a protected surface.
II. Align the legs (#2) to the pre-drilled holes on the corners of the table top (#1).
III. Prepare 8 bolt assemblies by FIRST inserting the lock washer (#B) onto the bolt (#A) then the flat
washer (#C) onto that SAME bolt (#A). Insert into the corners and secure using the Allen wrench (#D).
Carefully turn the completed table upright. Make sure the table is rested on a flat surface and does
not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.