Assembly Instructions

I. Align the legs (#3) to the pre-drilled holes located in the front of the seat frame (#2).
II. Prepare 4 bolt assemblies by FIRST inserting lock washer (#D) onto the bolt (#B) then the flat washer
(#E) onto the SAME bolt (#B), in that order. Insert into the front corners of the seat frame (#2) and
secure using the Allen wrench (#F).
ASSEMBLY IS COMPLETED
Carefully turn the completed chair upright. Make sure the chair is rested on a flat
surface and does not feel loose or wobbly. If it does, double check that the bolts
are secured and properly tightened.