Assembly Instructions

Page 4 of 5
I. Align the assembled left front
leg (#1) and the right front
leg (#2) with the pre-drilled
holes on the backrest with
legs (#3).
II. Secure 4 screws (#A)
through the brackets of the
left front leg (#1) and the
right front leg (#2) using the
Allen wrench (#C) to secure
them to the backrest with
legs (#3).
#A x 4 pcs
I. Align the front leg support
(#4) with the pre-drilled
holes of the left front leg (#1)
and the right front leg (#2).
II. Insert 2 bolts (#A) through
the left front leg (#1) and the
right front leg (#2) using the
Allen wrench (#C) to secure
them with the front leg
support (#4).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
#A x 8 pcs
Note: Right and left are determined by facing
the front of the chair in the upright position.