Assembly Instructions

1. Prepare 4 bolt assemblies
by first inserting a lock
washer (#D) onto the bolt
(#B) then a flat washer (#E)
onto that same bolt (#B).
2. Align the front legs (#3) to the front
corners of the cushion (#2). Then insert
2 bolt assemblies into each corner and
secure using the Allen wrench (#F).
Carefully turn the completed chair
upright. Make sure the chair is
rested on a flat surface and does
not feel loose or wobbly. If it does,
double check that the bolts are
secured and properly tightened.