1. Prepare 8 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A). 2. Carefully place the table top (#1) face down onto a protected surface. Then Align the table legs (#2) to the corner holes and insert 2 bolt assemblies into each corner. Secure using the Allen wrench (#D). Carefully turn the completed table upright. Make sure the table is rested on a flat surface and does not feel loose or wobbly.
2. Prepare 2 bolt assemblies 1. Place the chair by first inserting a lock back (#1) onto a washer (#D) onto the bolt protected surface. (#C) then a flat washer (#E) onto that same bolt (#C). 3. Align the cushion (#2) to the center holes on the chair back (#1), then insert the bolt assemblies into the center holes and secure using the Allen wrench (#F). 1. Prepare 4 bolt assemblies by first inserting a lock washer (#D) onto the bolt (#A) then a flat washer (#E) onto that same bolt (#A). 2.
1. Prepare 4 bolt assemblies 2. Align the front legs (#3) to the front by first inserting a lock corners of the cushion (#2). Then insert washer (#D) onto the bolt 2 bolt assemblies into each corner and (#B) then a flat washer (#E) secure using the Allen wrench (#F). onto that same bolt (#B). Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.
