Assembly Instructions

1. Prepare 4 bolt assemblies
by first inserting a lock
washer (#D) onto the bolt
(#B) then a flat washer (#E)
onto that same bolt (#B).
2. Align the front legs (#3) to the front
corners of the cushion (#2). Then insert
2 bolt assemblies into each corner and
secure using the Allen wrench (#F).
1. Slide the stretchers (#4,5) between the legs.
2. Insert a screw (#G) at a diagonal into the holes at the end
of each stretcher and secure using a Phillips screwdriver.
Note: Right and left are
determined by facing
the FRONT of the chair
in its upright position.