Installation & Assembly

1. Carefully place the top
panel (#1) face down
onto a protected surface.
2. Prepare 8 bolt assemblies by
first inserting a lock washer
(#C) onto the bolt (#A) then
a flat washer (#B) onto that
same bolt (#A), in that order.
3. Align the legs (#2) to the corners of the top
panel (#1), then insert the prepared bolt
assemblies and secure using the Allen wrench.
Carefully turn the completed table upright. Make sure the table is
rested on a flat surface and does not feel loose or wobbly. If it does,
double check that the bolts are secured and properly tightened.
Carefully place the
glass top (#3).
ASSEMBLY IS COMPLETED