Installation & Assembly

I. With the help of another person, carefully place the table top (#1)
facing down on a protected surface. Align the 4 legs (#2) with the
pre-drilled holes on the bottom corners of the table top (#1).
II. Prepare 8 bolt assemblies by inserting FIRST the lock washer
(#B) onto the bolt (#A) and then the flat washer (#C) onto the
SAME bolt (#A), in that order.
III. Insert the bolt assemblies through the pre-drilled holes on the
bottom corners of the table top (#1) and secure those bolts using
the Allen wrench (#D) to lock them in with the legs (#2).
Turn right (clockwise) to tighten
Page 4 of 4
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
ASSEMBLY IS COMPLETED
Carefully turn the completed table upright. Make sure the table is
rested on a flat surface and does not feel loose or wobbly. If it does,
double check the bolts/screws are secured and properly tightened.