Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench (precluded) @ assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST,CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger fiat washer and the head of the screw or bolt. Sims furniture comes with height adjustment knobs underneath each leg.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#C x PCs #D x PCs #E x PCs 1. Align the seat (#2) with the per-driled holes on the backrest with legs Il. Prepare 2 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#C) then the flat washer (#E) onto that SAME bolt 1II. Inge rt into the center holes on the seat (#2) secure using the Allen wrench Carefully place the backrest with Sags on a protected surface |.
I Align the front right legs (#3) with the per-drilled holes on the seat (#2) 1. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt {#B) then the flat washer (#E) onto the SAME bolt 11l. Insert into the front comers per-drilled holes on the seat {#2) and secure using the Allen wrench Carefully turn the completed chair upright. Make sure the chair is rested on a fiat surface and does not leaf loos or wobbly.
