Installation & Assembly

I. With the help of another person, carefully place the
table top (#1) facing down on a protected surface.
II. Align the legs (#3) to the pre-drilled holes on the
corners of the table top (#1).
III. Prepare 8 bolt assemblies by FIRST inserting the
lock washer (#B) onto the bolt (#A) then the flat
washer (#C) onto that SAME bolt (#A). Insert into
the corners and secure using the wrench (#D).
To insert the table leaf (#2) unlock the latches located under the table top (#1). Once unlocked, slide
outward on both ends of the outer-piece table until there is sufficient opening to place the leaf (#2).