Installation & Assembly

2. Prepare 4 bolt assemblies by first inserting the lock washer (#C) onto
the bolt (#D) then the flat washer (#B) onto that SAME bolt (#D).
ASSEMBLY IS COMPLETED
1. Carefully place the table top
(#1) face down onto a protected
surface. Align the support shelf
(#6) to the table top (#1)
3. Insert the bolt assemblies
into the corner holes of the
support shelf (#6) and secure
using the Allen wrench (#E).
Adjust the leveler according to the ground level. Turn the
leveler clockwise or counterclockwise, respectively.