User's Manual

Technical Document Template Version 1.0 Page 34 of 88
a. Server:
1 Name
Insert FTP server name, only allow characters 0-9, a-
z,
A-Z, “.”, “_”
2 Server type
Select FTP server.
3 Network address
Insert the FTP network’s address.
4 Server port
Default is 21.
Change only if your FTP server uses a
different port.
5 Upload path
Provide the upload path.
b. Login:
1 User name
Provide valid login credentials for the FTP server.
2 Password
3 Re-type password
4 Passive mode
On
Enable if your FTP
server utilizes passive FTP, which
is the most common method.
Off
5 Test connection
Click test connection button to check if the FTP server
is connected, If the connection is successful, a window
will pop-out.
c. Settings:
1 Available memory buffer
T
he camera will reserve a buffer in its memory for the
recording and snapshot. This section displays the
remaining available memory.
2 Attached type
Video
Select attached format.
Snapshot
3
Pre-event
Recording seconds/
Send Image
0~7 recording seconds/
0~7 images
Select
the start time for recording/ snapshot prior to
event.
4
Post-event
Recording seconds/
Send Image
0~7 recording seconds/
0~7 images
S
elect the end time for recording/ snapshot subsequent
to event.
5 Image file name
Insert Image file name, only allow characters 0-9, a-
z,
A-Z, “.”, “_”
6 Suffix
None
Allows users to add date time to the file name.
Date Time
How to create FTP server:
a. Step 1: Key in FTP server information
b. Step 2: Configure login details
c. Step 3: Click “Test Connection” to make sure the server is detected
d. Step 4: Choose the attached type and configure related settings
e. Step 5: Click the save button