User manual

10、Calibration(Initialization)
 If the gimbal has the following situations, please calibrate it:
1 The pitch angle is not leveled with the vertical surface.
2 The roll angle is not parallel to the horizontal surface.
3 Under the lock mode, the panning angle drifting.
 Calibration Operation Instruction ：
Method 1：Off-line Calibration
(1) Power on the gimbal(around 3 seconds), long press the middle button of the
joystick over 6 seconds till the status indicator light is solid.
(2) Lay the gimbal on a static flat surface, make sure it has no shaking.
Calibration is finish when the status indicator light is continuously
flashing for 3 times.
(3) Power off the gimbal and restart it, if the calibration is unsuccessful,
you can repeat step(1)(2) to reinitialize.
Method 2：On-line Calibration
Please visit our official website http://www.hohem-tech.com， and visit the
SUPPORT to download the calibration software of HG5 and operation
introduction to calibrate the gimbal.
11、Firmware Upgrade
Please visit the official website http://www.hohem-tech.com, and visit the
SUPPORT to download the USB driver software, the software of HG5 firmware upgrade,
the latest firmware and operation manual to upgrade the firmware.
We provide various kinds of optional accessories.Please contact us for more
information.Email:[e-mail]
12、DISCLAIMER
1 Please install and use the product according to the manual!
2 Please use the standard battery charger!
3 Please reconfirm the gimbal and the smartphone are well installed before
power on!
4 Keep the battery away from fire and heat source!
5 Prohibit any user for any illegal purpose. Users will be responsible for
all behavior of purchasing and using the products.
6 For any unknown sources or usage, we will not provide any service.
7 If there is any question, please contact the technician of Hohem Tech, we
won’t be responsible for any wrong operations by users.
8 Hohem Tech reserves the right for final explanation.