User manual
Parameters
Material ABS+PC
Gimbal Size (Folding Status) 175 * 50 * 52 mm
Weight (Including Battery) 329 g
Working Time 10 Hours for stabilizer
Angle Vibration Range ± 0.01°
Controllable Vibration Range Pan / Tilt 360° ; Roll 320°
Max Controllable Rotating Speed 150°/S
Compatible Smartphone Size Compatible with iPhone X,
iphone 8 Plus / 7 Plus / 6s
Plus / 6 Plus, iPhone 8 / 7 / 6s / 6,
iPhone 5s / 5 / SE, and Android
smartphones up to 6.0 inch
Bluetooth BLE4.0
Battery
Type Lithium Battery
Capacity 3600 mAh
Voltage 3.7 V
Charging Temperature 5 - 25°
Operating Temperature 0 - 50°
Calibration (Initialization)
If the stabilizer has the following situations, please calibrate it:
The title angle is not leveled with the vertical surface.
Under the lock mode, the panning angle drifting.
Calibration Operation Instruction:
Method 1: Off-line Calibration
1. Power on the stabilizer (around 3 seconds), long press the mode switch
button over 6 seconds till the M1 & M2 light constant on.
2. Lay the stabilizer on a static at surface; make sure it has no shaking.
Calibration is nish when the M1&M2 light is continuously ashing
for 3 times.
3. Power off the stabilizer and restart it, please repeat step (1) (2) or go to
method 2 to reinitialize if failed.
Method 2: On-line Calibration
Please visit our ofcial website http://www.hohem-tech.com, and visit
the SUPPORT to download the calibration software of D1 and operation
introduction to calibrate the stabilizer.