D1 Foldable Stabilizer for Smartphone Hohem Technology Co.
Safety instructions Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in theses operating instructions, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee. • The device is not a toy. Keep it out of the reach of children and pets. • Do not leave packaging material lying around carelessly.
Production Introduction 1. Product Overview Rolling 320 ° Panning / Tilting 360° Mode Switch button 4-way joystick Photo / Video switch button Reset Hole { Roll axis P1 unlocking Button P2 Power on / off Button Bluetooth Indicator Working Modes Indicator Mobile Phone Charging Port 2 Roll Axis Pan / Tilt Axis Mobile Phone Charging Port 1 Battery Charging & Upgrade Port Battery Capacity Indicator 2.
Installation Introduction 1. Install the ‘Hohem Studio’App Search for ‘Hohem Studio’ in the App Store or Google Play and install the app on your mobile phone. *‘Hohem Studio’ supports iOS 8.0 andAndroid 4.4 or above 2. Stabilizer Charging & Smartphone Charging Fully charge the stabilizer before using it for the first time using the standard USB cable connecting to the stabilizer charging port (or other power sources).
3. Mount and Balance the mobile phone a. Open the Roll Axis. b. Pull the mobile phone clip to the max and make sure the charging port 2 and smartphone charging port are at the same side. c. Put one side of the mobile phone first. d. Then put another side of the mobile phone into the clip and make sure they are fit together with each other. e. Balance the mobile phone With the stabilizer power off, make sure the mobile phone remains level when released. 4. Connect “Hohem Studio” APP a.
5. Four Main Usages Status P1: placement mode P2: hand-held mode Operation Instruction & Working Mode 1.
2. Indicator Instruction M2 light normal on: Lock working mode Bluetooth light ON means Bluetooth Connected. Bluetooth light OFF means Bluetooth not Connected. M1 Light normal on: Pan / Tilt Working Mode (M1 & M2 quick flashing simultaneously for twice: Power on / off) 3.
Parameters Material Gimbal Size (Folding Status) Weight (Including Battery) Working Time Angle Vibration Range Controllable Vibration Range Max Controllable Rotating Speed Compatible Smartphone Size Bluetooth Battery Type Capacity Voltage Charging Temperature Operating Temperature ABS+PC 175 * 50 * 52 mm 329 g 10 Hours for stabilizer ± 0.
Firmware upgrade Please visit our official website http://www.hohem-tech.com, and visit the SUPPORT to download the USB driver software, the software of D1 firmware upgrade, the latest Firmware and operation manual to upgrade the firmware. We provide various kinds of optional accessories. Please contact us for more information. Email: service@hohem-tech.com DISCLAIMER j P lease install and use the product according to the manual. k P lease use the standard battery charger.
