Installation Instructions

SECTION 1

1. Measure the door opening

Divide in two parts the measurement of the doorframe width, and then cut

the top tracks based on those measurements. This way they will be

properly installed and will join together towards the center

2. Install one of the Top Tracks

Install one of the Top Tracks, and secure it completely.

3. Install the doors

Insert doors in the track that is already installed, the first one with the

closing channel towards the wall, and the second one with the closing

channel to the opposite side of the first one. Ensure that both doors are

properly inserted in the track.

4. Install the second Top Track

Install the second top track and fix it with the necessary screws. Slide the

second door towards the track and place a screw in the joint of the two

upper tracks. Do not fully tighten the screw; this will avoid the doors sliding

from one top rail to the other

5. Complete the individual doors

Consult the single door instruction manual. Follow steps 5, 6 and 7, and

then apply some lubricant in the top tracks.

6. Ensure the anchorage panels

Follow step 8 of the individual door manual. The doors will be joined

together toward the center with the magnets.

Section 2

DOUBLE DOOR INSTALLATION INSTRUCTIONS

DOOR INSTALLED