Installation Instructions

DOOR INSTALLED

5. Door installation (A)

Ensure that all the sliders all well attached, apply the lubricant (E) in the Top

Track, then install the door (A) introducing the sliders in the Top Track (B).

6. Ensure the Top Track (B)

Return the track to its original position. After drilling the screw guides (with

a drill with 3/32 bit). Place the 1” track screws through each hole in the

track. Place all the screws as straight and tight as possible to ensure the

proper functioning of the door, and then slide the door along the track

repeatedly in order to spread the lubricant.

7. Fix the anchorage panel

Slide the door toward the side of the closing; locate the holes of the anchor

panel, mark, punch (if necessary) and screw, fixing the anchor panel.

8. Installation of the magnetic plate (F)

Slide the lead panel against the frame, notice the magnet in the main panel

and mark the height on the frame, then attach the magnetic plate (F) to the

marks using flat head screws (G)

Section 1