User Manual

IMPORTANT SAFETY DETAILS
1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
2. Thisproductmustbeinstalledbyaqualiedelectricianinaccordancewithinstructionsprovidedandincompliancewithrecognisedelectrical
 andsafetyregulationsrelevanttothecountryitisbeinginstalled.
3. This product may NOT be installed by minors or people with a mental disability.
4. Riskofreorelectricshock:Donotusewithextensioncordnearwaterorwherewatermayaccumulate.Keepplugsandreceptaclesdry.
5. Theelectricalratingoftheseproductsismarkedontheluminaire;theinstallermustdeterminewhethertheyhavethecorrectinputvoltageat
the luminaire before installation.
6. Topreventwiringdamageorabrasion,donotexposewiringtoedgesofsheetmetalorothersharpobjects.
7. DoNOTreplacelightbulbsduringrainorwhenwet.
8. Check that the adapter is properly connected to the string light
CAUTION
1. Topreventbreakageduringwindyconditions,installstrandsfarapartenoughsobulbscan’tstrikeeachotheroranythingelse.
2. Capoffemptysocketsandcordendstopreventcorrosion.
3. Donotexceed18wattsallsocketscombined.Donotlinkwithotherstringlightsbecausethemaximumwattagewillbeexceeded.
4. ConnectingmultipleLightStringsrequiresupportneartheconnectingareapreventingplugandsocketfrombeingpulledapart.
INSTALLATION WAYS
Use nails Use cup hooks Use zip ties Use guide wires
SPECIFICATIONS
Input power: 220-240V 50/60Hz
Output power: 12V 1.1A
Max Wattage: 18W
Max Wattage per Socket: 1W per bulb recommended (do not exceed the maximum of 18W all bulbs combined)
Socket: 15 Sockets with Built-in Hanging Loops
Socket Type: E27 Base
Lighting Effects: Constant light (no effect)
Indoor/Outdoor:Indoor,Outdoor
Total Length (end to end): H05VV-F 2X1.0mm2x15M+0.2M
Bulb Spacing: 1m between sockets
Length from plug to 1st bulb: 0.7m
Lampholder IP class: IP65