Tus neeg siv phau ntawv

INSTALLATION DETAILS
1. Turn the solar light on with the ON/OFF switch (g. 1)
2. Pick a spot to install the solar light, where the solar light can receive an adequate amount of sunlight.
3. Use the supplied wall plugs and wall screws to mount the solar light on the desired surface (g. 2). Adjust the light as desired. Adjust the solar
panel so that it can receive the maximum amount of sun light possible (g. 3).
1.
2. 3.
85°
140°
BATTERY REPLACEMENT
The performance of the battery may decrease over time (usually about
1-2 years), please replace the battery as shown on this picture.
1. Remove the 4 screws
2. Replace the battery
SWITCHING LIGHT MODES
Mode 1: The motion sensor is activated by pressing the on/off button one time.
Mode 2: Bright light is activated by pressing the button a second time.
Mode 3: Dim light is activated by pressing the button a third time.
To turn the light off press the button a fourth time.