Tus neeg siv phau ntawv

PRODUCT SPECIFICATIONS
Solar panel: Polycrystalline 4V 2.5W, 18% efciency
Battery: LiFePo4 22650# 3.2V 2200mAh
Light source: 38 LEDS
Working time: 8-10 hours (after fully charged)
Charging time: 4-6 hours under direct sunlight
Functions:
Motion mode: The light shines very bright when motion is detected for 60 seconds and then goes to dim mode
Security mode: The light shines very bright when motion is detected and then turns off
Steady mode: The light stays on for 6-8 hours after the light has been fully charged
IP Rating: IP65
Material: ABS, PC
Color: Black
Switch type: on/off switch
IMPORTANT SAFETY DETAILS
1. This product must be installed by a qualied electrician in accordance with instructions provided and in compliance with recognised electrical
and safety regulations relevant to the country it is being installed.
2. Please handle carefully, avoid rough handling and collision.
3. This product may NOT be installed by minors or people with a mental disability.
4. The product should NOT be covered with insulation material at any time. Unless using a model with an insulation guard.
5. Please keep the surface of the solar panel clean, to make sure the product works at it’s best performance.
6. It is important to install the light in a location that receive full sunlight each day, away from the shade caused by trees, buildings etc. Shady
locations will not allow the battery to be fully charged and will reduce the hours of night time light.
7. The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability. On cloudy
days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operating time.
8. Dispose the used battery properly! Do not dispose the battery in re!