User Manual

STANDARD REMOTE CONTROL
The remote control is taught-in as standard from factory setting and does not have to be registered on the transformer. Insert the supplied batteries into the remote
control,whichisnowreadyforuse.Belowyouwillndthefunctionsoftheremotecontrol.
1. SET - Pairing with driver
2. ON - Turn on
3. OFF - Turn off
4. Brightness (+) - Gradually increase brightness
5. Brightness (-) - Gradually decrease brightness
6. Step Brightness (+) - Brightness in steps 10%, 30%, 70%, 100%
7. Step Brightness (-) - Brightness in steps 10%, 30%, 70%, 100%
8. Mode - Brightness 100%
9. Night light - Brightness 10%
10. DIY1/DIY2 - Congure DIY modus
11. Delay - Turn off after 30 seconds
Pairing Remote Control
1. Disconnect the power of the driver
2. Press and hold the SET button
3. Connect power to the driver
4. ReleasetheSETbuttonassoonasthelightsicker
5. Press the Mode button 4 times repeatedly
COMPATIBLE WITH
REMOTE CONTROLS
Remote control 2 channel, SKU: 5422294
Remote control 4 channel, SKU: ITL-R-4
WALL DIMMERS
Wall panel, SKU: 5422300
Wall panel, SKU: ITL2.4GMD
EN