User Manual

ManualsBrandsHOFTRONIC ManualsLights DimmableHOFTRONIC 1M3W-6TMD Malaga LED Porch Lights Dimmable

STANDARD REMOTE CONTROL + WALL DIMMER

The remote control is taught-in as standard from factory setting and does not have to be registered on the transformer. Insert the supplied batteries into the remote

control,whichisnowreadyforuse.Belowyouwillndthefunctionsoftheremotecontrol.

1. SET - Pairing with driver

2. ON - Turn on

3. OFF - Turn off

4. Brightness (+) - Gradually increase brightness

5. Brightness (-) - Gradually decrease brightness

6. Step Brightness (+) - Brightness in steps 10%, 30%, 70%, 100%

7. Step Brightness (-) - Brightness in steps 10%, 30%, 70%, 100%

8. Mode - Brightness 100%

9. Night light - Brightness 10%

10. DIY1/DIY2 - Congure DIY modus

11. Delay - Turn off after 30 seconds

Pairing Remote Control

1. Disconnect the power of the driver

2. Press and hold the SET button

3. Connect power to the driver

4. ReleasetheSETbuttonassoonasthelightsicker

5. Press the Mode button 4 times repeatedly

1. ON/OFF - Turn on/off

2. Brightness (+) - Gradually increase brightness

3. Brightness (-) - Gradually decrease brightness

4. Night light - Brightness 10%

5. Delay - Turn o after 30 seconds

Pairing wall dimmer

1. Disconnect the power of the driver

2. Press and hold the ON/OFF button

3. Connect power to the driver

4. Release the ON/OFF button

5. Press the Night light button 3 times

Thewalldimmermustbepairedwiththedriver,thisisnotsetbydefault.Belowyouwillndthefunctionsofthewalldimmerandhowitispairedtothedriver.

OPTIONAL 4 CHANNEL REMOTE

1. ON - Turn on

2. OFF - Turn off

3. Brightness (+) - Gradually increase brightness

4. Brightness (-) - Gradually decrease brightness

5. Dim - Brightness in steps 10%, 30%, 70%, 100%

6. Night light - Brightness 10%

7. Zone - Selection for the control zone

Pairing Remote Control

1. Disconnect the power of the driver 4. Connect power to the driver

2. Select the zone with the Zone button 5. Release the DIM button

3. Press and hold the DIM button 6. Press the ON button 4 times repeatedly

Theremotecontrolmustbepairedwiththedriver,thisisnotsetbydefault.Belowyouwillndthefunctionsoftheremotecontrolandhowitispairedtothedriver.