User Manual

ANNEX
Dialing Patterns
1.3 • 15.01.2007 87
• If you only enter a “G” in all 3 rows, the telephone number you
entered in the "Telephone number" field of the “Make New Dial
Up Connection” window will be dialled exactly. In this case, the
remaining fields for the country and area are of no significance.
This is the simplest way
of adjusting.
Fig.67: Dialing patterns 2
• If you enter additional entries, the telephone number will be
composed of the additional entries for country code and area
code.
Fig.68: Dialing patterns | additional entries
The example above shows dialling via outside line access. Here,
the preceding zero must be entered (0,G).
Here, the Country code and Area code fields are compared to the
local settings (e.g. office) and will only be dialled when the number
of the location and the number of the destination are different.
If you are at a different location as entered in your local settings
dialling problems might occur as the program always compares the
number to be dialled with the local settings.