User Manual

FURTHER FUNCTIONS AND SETTINGS
Display
36 1.3 • 15.01.2007
3.1.4 Setting the Brightness
The skeye.pad XSL supplies no contrast settings as the contrast of
a TFT screen cannot be changed.
1. Launch: Start ⇒
⇒⇒
⇒ Settings ⇒
⇒⇒
⇒ Control Panel
The "Control Panel" menu appears (see Fig.6).
2. In the Control Panel menu double-tap the backlight
symbol. The “Backlight” window appears.
Fig.24: Backlight
3. In this window, adjust the brightness of the backlight with the
slider.
To conserve battery power, keep the brightness setting as low
as possible.
4. Then, change to the Idle 1 tab.
Fig.25: Backlight |Idle 1
5. In this window, use the slider to set the brightness for the “User
Idle Brightness” mode (see chapter 2.6.3).
6. If required, change to the Idle 2 tab.