User Manual

FURTHER FUNCTIONS AND SETTINGS
Display
1.3 • 15.01.2007 31
3. Further Functions and Settings
3.1 Display
3.1.1 Calibrating the Touch
This function is required to fine-tune the touch screen; the better the
touch screen is calibrated the more precisely it will react.
When calibrating the touch screen note the following:
• Touch the cross and keep the stylus pressed at the middle
of the cross until the cross moves to the next marking.
• Do not drag the stylus over the touch screen.
• Do not rest your hand on the touch screen!
1. Launch: Start ⇒
⇒⇒
⇒ Settings ⇒
⇒⇒
⇒ Control Panel
The "Control Panel" window appears.
2. Double-tap the Stylus symbol.
The "Stylus Properties" window appears.
Fig.18: Stylus Properties
3. In the Stylus Properties window tap the Calibration tab.
Fig.19: Stylus Properties | Calibration