User's Manual

Vectron User manual
© Höft & Wessel AG

Subject to amendment, errors excepted HW8660UserMan.doc 1.0 02.02.2001 Lin
page 52
/
70
8. Plug-in in ID-000-format
8.1 Description
fig. 14: Plug-in
The Plug-in in ID-000-format (e.g. dealer card) contains the key to withdraw money from customer smart
cards of corresponding payment systems. That for, if the HW 90196 is intended to accept smart cards
etc., a relevant plug-in for the payment system has to be inserted in the corresponding slot.
If the dealer card is sent in „oversize format“, take out the punched card part (plug-in) carefully.
The HW 90196 can take in 2 plug-ins. The corresponding slots are on the bottom side of the HW 90196
on the board which you will see after having removed the accu block.
Plug-in Payment system
←
Smart card
↑
Reserved
fig. 2: Assignment of plug-ins
fig. 15: HW 90196 with plug-ins
Plug-in-slot for
smart card
label
12-pole system
interface
(hidden)
Reset-key
accu contacts