User's Manual

User manual Vectron
   
© Höft & Wessel AG
page 47/70
Lin 02.02.2001 1.00 HW8660UserMan.doc Subject to amendment, errors excepted
6.8.2 Replacing accu block of printer HW 90195
1. Open lid of accu casing by pressing both locking bottoms of accu casing
lid.
2. Remove accu block.
3. Insert new accu block (reverse battery protection- no vice versa insertion
possible).
4. Close lid of accu casing.
6.8.3 Recharging the accu blocks
The accu blocks can be recharged in the accu charging unit HW 16196 (s. chap. Fehler! Verweisquelle
konnte nicht gefunden werden.) or in the communication station HW 50196.
6.8.4 Maintenance and disposal
See chapter 4.4 and 4.5.